Rohde & Schwarz R&S FSP Series, Руководство по эксплуатации

Страница: 602 / 796

R&S FSP Remote Control – Description of Commands
SOURce Subsystem
6.208 Operating Manual 1164.4556.12 - 06
SOURce<1|2>:FM:STATe ON | OFF
This command switches on or off the external frequency modulation of the tracking generator in the
selected measurement window.
External I/Q modulation is switched off, if active. This command is only valid in conjunction with the
tracking generator option B9.
Example:
"SOUR:FM:STAT ON"
'Switches on the external frequency modulation of the tracking generator for
screen A.
Characteristics: *RST value: OFF
SCPI: conform
Mode: A
SOURce<1|2>:FREQuency:OFFSet -150MHz to 150MHz
This command defines a frequency offset of the tracking generator for the indicated measurement
window. Frequency-converting DUTs can be measured with this setting.
The possible value range is -150 MHz to 150 MHz. It should be noted that the terms (start frequency
- tracking frequency offset) and (stop frequency - tracking frequency offset) are both > 1 kHz or both <
-1 kHz.
External I/Q modulation is switched off, if active. This command is only valid in conjunction with the
tracking generator option B9.
Example:
"SOUR:FREQ:OFFS 10MHz"
'Switches on the frequency offset of the tracking generator for screen A to 10 MHz.
Characteristics: *RST value: 0 Hz
SCPI: conform
Mode: A
SOURce<1|2>:POWer[:LEVel][:IMMediate][:AMPLitude] <numeric_value>
This command defines the output level of the tracking generator in the current measurement window.
This command is only valid in conjunction with the tracking generator option B9.
Parameter: <numeric value>::= -30 dBm to 0 dBm
Example:
"SOUR:POW -20dBm"
'Sets the tracking generator level in screen A to -20 dBm.
Characteristics: *RST value: -20 dBm
SCPI: conform
Mode: A