Rohde & Schwarz R&S FSP Series, Руководство по эксплуатации

Страница: 627 / 796

Operating Manual 1164.4556.12 - 06 6.233
R&S FSP Remote Control – Description of Commands
SYSTem Subsystem
Characteristics: *RST value: --
SCPI: device-specific
Mode: A
SYSTem:SHUTdown
This command shuts down the instrument.
This command is an event and therefore has no query and no *RST value.
Example:
"SYST:SHUT"
Characteristics: *RST value: -
SCPI: device- specific
Mode: A
SYSTem:SPEaker:VOLume 0 to 1
This command sets the volume of the built-in loudspeaker for demodulated signals. Minimum volume
is set by 0 and maximum volume by 1.
The value 0 is the lowest volume, the value 1 the highest volume.
Example:
"SYST:SPE:VOL 0.5"
Characteristics: *RST value: 0
SCPI: device-specific
Mode: A
The command is only available with the audio demodulator option (R&S FSP-B3).
SYSTem:TIME 0 to 23, 0 to 59, 0 to 59
This command sets the internal clock. The sequence of entry is hour, minute, second.
Example:
"SYST:TIME 12,30,30"
Characteristics: *RST value: –
SCPI: conform
Mode: A
SYSTem:VERSion?
This command queries the number of the SCPI version, which is relevant for the instrument.
Example:
"SYST:VERS?"
Characteristics: *RST value: –
SCPI: conform
Mode: A
This command is a query and therefore has no *RST value.