Rohde & Schwarz R&S FSP Series, Руководство по эксплуатации

Страница: 554 / 796

R&S FSP Remote Control – Description of Commands
SENSe Subsystem
6.160 Operating Manual 1164.4556.12 - 06
Characteristics: *RST value:-
SCPI: device-specific
Mode: A
[SENSe<1|2>:]ESPectrum:PRESet[:STANdard] 'xml_file'
This command selects the specified XML file under D:\r_s\instr\sem_std . If the file is stored in a
subdirectory, include the relative path.
The query returns information about the selected standard, the power class and the link direction. If no
standard has been selected, the query returns ''.
The numeric suffix at SENSe<1|2> is irrelevant.
Example:
"ESP:PRES 'WCDMA\3GPP\DL\PowerClass_31_39.xml"
'Selects the PowerClass_31_39.xml XML file in the folder
’D:\R_S\instr\sem_std\WCDMA\3GPP\DL .
"ESP:PRES?"
'Returns 'W-CDMA 3GPP (31,39)dBm DL
Characteristics: *RST value:
SCPI: device-specific
Mode: A
[SENSe<1|2>:]ESPectrum:RANGe<1...20>:BANDwidth[:RESolution] <numeric_value>
This command selects the resolution bandwidth (RBW) of a range in the Spectrum Emission Mask
measurement.
The numeric suffixes <1...20> specify the range. The numeric suffix at SENSe<1|2> is irrelevant.
Example:
"ESP:RANG2:BAND 10E3"
'sets the RBW to 10 KHz
Characteristics: *RST value: 10 kHz
SCPI: device-specific
Mode: A
[SENSe<1|2>:]ESPectrum:RANGe<1...20>:BANDwidth:VIDeo <numeric_value>
This command selects the video bandwidth (VBW) of a range in the Spectrum Emission Mask
measurement.
The numeric suffixes <1...20> specify the range. The numeric suffix at SENSe<1|2> is irrelevant.
Example:
"ESP:RANG2:BAND:VID 100E3"
'sets the VBW to 100 KHz
Characteristics: *RST value: 30 kHz
SCPI: device-specific
Mode: A