Rohde & Schwarz R&S FSP Series, Руководство по эксплуатации

Страница: 681 / 796

Operating Manual 1164.4556.12 - 06 6.287
R&S FSP Remote Control – Description of Commands
Differences in GPIB Behavior between the FSP and the FSE Families of Instruments
FSET/
ESIB CALCulate<1|2>:LIMit<1...8>:UNIT DBM | DBPW | WATT |
DBUV | DBMV | VOLT |
DBUA | AMPere | DB |
DBUV_MHZ |
DBMV_MHZ |
DBUA_MHZ | |DBUV_M
| DBUA_M | DBUV_MHZ
| DBUA_MHZ | DEG |
RAD | S | HZ | PCT |
UNITLESS only the following units
are available for the
R&S FSP:DBM | DBPW
| WATT | DBUV | DBMV |
VOLT | DBUA | AMPere |
DB | DBUV_M |
DBUA_M | DEG | RAD |
S | HZ | PCT |
UNITLESS
R&S
FSP FSE CALCulate<1|2>:LIMit<1...8>:UPPer:MARGin <numeric value>
R&S
FSP FSE CALCulate<1|2>:LIMit<1...8>:UPPer:MODE RELative | ABSolute
R&S
FSP FSE CALCulate<1|2>:LIMit<1...8>:UPPer:OFFset <numeric value>
R&S
FSP FSE CALCulate<1|2>:LIMit<1...8>:UPPer:SHIFt <numeric_value>
R&S
FSP FSE CALCulate<1|2>:LIMit<1...8>:UPPer:SPACing LINear | LOGarithmic
R&S
FSP FSE CALCulate<1|2>:LIMit<1...8>:UPPer:STATe ON | OFF
R&S
FSP CALCulate<1|2>:LIMit<1...8>:UPPer:THReshold <numeric value> new function for
R&S FSP
R&S
FSP FSE CALCulate<1|2>:LIMit<1...8>:UPPer[:DATA] <numeric value>
R&S
FSP FSE CALCulate<1|2>:MARKer<1...4>:AOFF
R&S
FSP FSE CALCulate<1|2>:MARKer<1...4>:COUNt ON | OFF
R&S
FSP FSE CALCulate<1|2>:MARKer<1...4>:COUNt:
FREQuency?
R&S
FSP FSE CALCulate<1|2>:MARKer<1...4>:COUNt:
RESolution 0.1 | 1 | 10 | 100 | 1000 |
10000 Hz
FSE CALCulate<1|2>:MARKer<1...4>:
COUPled[STATe] ON | OFF not available for
R&S FSP
FSE CALCulate<1|2>:MARKer<1...4>:FUNCtion:
ADEMod:AFRequency[:RESult]? not available for
R&S FSP and FSET
FSE CALCulate<1|2>:MARKer<1...4>:FUNCtion:
ADEMod:AM[:RESult]? PPEak | MPEak |
MIDDle | RMS not available for
R&S FSP and FSET
FSE CALCulate<1|2>:MARKer<1...4>:FUNCtion:
ADEMod:CARRier[:RESult]? not available for
R&S FSP and FSET
FSE CALCulate<1|2>:MARKer<1...4>:FUNCtion:
ADEMod:FERRor[:RESult]? not available for
R&S FSP and FSET
FSE CALCulate<1|2>:MARKer<1...4>:FUNCtion:
ADEMod:FM[:RESult]? PPEak | MPEak |
MIDDle | RMS | RDEV not available for
R&S FSP and FSET
FSE CALCulate<1|2>:MARKer<1...4>:FUNCtion:
ADEMod:PM[:RESult]? PPEak | MPEak |
MIDDle | RMS not available for
R&S FSP and FSET
Devices Command (Sheet 8 of 47) Parameter Notes