Rohde & Schwarz R&S FSP Series, Руководство по эксплуатации

Страница: 473 / 796

Operating Manual 1164.4556.12 - 06 6.79
R&S FSP Remote Control – Description of Commands
CALCulate Subsystem
CALCulate<1|2>:MARKer<1...4>:FUNCtion:STRack:THReshold -330dBm to +30dBm
This command defines the threshold above which the largest signal is searched for in the selected
measurement window. The function is independent of the selected marker, i.e. the numeric suffix
<1...4> of MARKer is irrelevant. It is only available in the frequency domain (span > 0).
The response unit depends on the settings defined with
CALC:UNIT
.
Example:
"CALC:MARK:FUNC:STR:THR -50DBM"
'Sets the threshold for signal tracking in screen A to -50 dBm.
Characteristics: *RST value: -120 dBm
SCPI: device-specific
Mode: A-F
CALCulate<1|2>:MARKer<1...4>:FUNCtion:STRack:TRACe 1 to 3
This command defines the trace on which the largest signal is searched for in the selected
measurement window. The function is independent of the selected marker, i.e. the numeric suffix
<1...4> of MARKer is irrelevant. It is only available in the frequency domain (span > 0).
Example:
"CALC2:MARK:FUNC:STR:TRAC 3"
'Defines trace 3 in screen B as the trace for signal tracking.
Characteristics: *RST value: 1
SCPI: device-specific
Mode: A-F
The entry of the search bandwidth is only possible if the Signal Track function is
switched on (
CALC:MARK:FUNC:STR ON
).