Rohde & Schwarz R&S FSP Series, Руководство по эксплуатации

Страница: 687 / 796

Operating Manual 1164.4556.12 - 06 6.293
R&S FSP Remote Control – Description of Commands
Differences in GPIB Behavior between the FSP and the FSE Families of Instruments
R&S
FSP CALCulate<1|2>:MATH:MODE LINear | LOGarithmic affects all traces on the
R&S FSP; therefore the
numeric suffix :
MATH<1...4> is not
allowed for the R&S FSP
FSE CALCulate<1|2>:MATH<1...4>:MODE LINear | LOGarithmic for FSE, only the trace
indicated by a numeric
suffix is affected
R&S
FSP CALCulate<1|2>:MATH:POS -100PCT to 200PCT new function for
R&S FSP; replacement
for CALC:RLINe of the
FSE
R&S
FSP FSE CALCulate<1|2>:MATH:STATe ON | OFF for R&S FSP, traces can
only be subtracted from
trace 1; therefore there is
no numeric suffix behind
:MATH
R&S
FSP FSE CALCulate<1|2>:MATH[:EXPRession][:DEFine] <expr> for R&S FSP, traces can
only be subtracted from
trace 1; therefore there is
no numeric suffix behind
:MATH and <expr> may
only consist of
(TRACE1-TRACE2) or
(TRACE1-TRACE3)
FSE CALCulate<1|2>:RLINe MIN to MAX not available for
R&S FSP (replaced by
CALC:MATH:POS)
FSE CALCulate<1|2>:RLINe:STATe ON | OFF not available for
R&S FSP (replaced by
CALC:MATH:POS)
R&S
FSP FSE CALCulate<1|2>:THReshold MIN to MAX
R&S
FSP FSE CALCulate<1|2>:THReshold:STATe ON | OFF
FSE CALCulate<1|2>:TLINe<1|2> 0 to 1000s not available on the
R&S FSP; replaced by
CALC:SLIMits:LEFT and
CALC:SLIMits:RIGHt
FSE CALCulate<1|2>:TLINe<1|2>:STATe ON | OFF not available on the
R&S FSP; replaced by
CALC:SLIMits:LEFT and
CALC:SLIMits:RIGHt
FSE CALCulate<1|2>:UNIT:ANGLe DEG | RAD not available for
R&S FSP
R&S
FSP CALCulate<1|2>:UNIT:POWer DBM | V | A | W | DBPW
| WATT | DBUV | DBMV
| VOLT | DBUA |
AMPere available units are
compatible to the FSE
Devices Command (Sheet 14 of 47) Parameter Notes