Rohde & Schwarz R&S FSP Series, Руководство по эксплуатации

Страница: 356 / 796

R&S FSP Instrument Functions
LO/IF ports for external mixers - Option R&S FSP-B21
4.284 Operating Manual 1164.4556.12 - 06
The example of operation is described in the following steps:
1. Test setup
2. Activating the external mixing and selecting the mode
3. Default setting
4. Level correction
5. Frequency-dependent level correction
6. Level correction with average value
7. Taking into account the cable loss in the IF path
8. Functions for signal identification
1. Test setup
➢
Connect the 'LO OUT / IF IN' output of the R&S FSP to the LO/IF port of the
external mixer.
➢
Connect the multiplier to the external mixer.
➢
Apply a sinewave signal with f = 14.5 GHz to the input of the multiplier.
2. Activating the external mixing and selecting the mode
➢
Activate the external mixing with
[
FREQUENCY : EXTERNAL MIXER ]
3. Default setting
➢
Prior to the measurement select the required band (in this case the V band)
with
[
FREQUENCY : EXTERNAL MIXER : SELECT BAND]
➢
Select the V band using the cursor keys and ENTER
S P E C T R U M A N A L Y Z E R 9 k H z . .. 3 G H z F S P
.
1 0 9 3 .4 4 9 5 . 0 3
.
M A D E I N G E R M A N Y
P R E S E T
M A D E I N G E R M A N Y
L O O U T / I F I N
E x t e r n a l
M ix e r
R F I N P U T = 1 4 , 5 G H z
R F
L O / I F
M u lt ip lie r