Rohde & Schwarz R&S FSP Series, Руководство по эксплуатации

Страница: 403 / 796

Operating Manual 1164.4556.12 - 06 6.9
R&S FSP Remote Control – Description of Commands
Common Commands
*IDN?
IDENTIFICATION QUERY queries the instrument identification.
Example:
"Rohde&Schwarz, FSP-3, 123456/789, 4.31"
FSP-3 = Device name
123456/789 = Serial number of the instrument
4.31 = Firmware version number
*IST?
INDIVIDUAL STATUS QUERY returns the contents of the IST flag in decimal form (0 | 1). The IST flag
is the status bit which is sent during a parallel poll (cf. chapter “Remote Control – Basics” ).
*OPC
OPERATION COMPLETE sets bit 0 in the event status register when all preceding commands have
been executed. This bit can be used to initiate a service request (cf. chapter “Remote Control –
Basics” ).
*OPC?
OPERATION COMPLETE QUERY writes message "1" into the output buffer as soon as all preceding
commands have been executed (cf. chapter “Remote Control – Basics” ).
*OPT?
OPTION IDENTIFICATION QUERY checks which options the instrument contains and returns a list of
installed options. The individual options are separated by commas.
Position Option
1 R&S FSP-B3 Audio Demodulator
2 R&S FSP-B4 OCXO
3 reserved
4 R&S FSP-B6 TV and RF Trigger
5 to 6 reserved
7 R&S FSP-B9 Tracking Generator 3 GHz / can be I/Q-modulated
8 R&S FSP-B10 Ext. Generator Control
9 to 12 reserved
13 R&S FSP-B15 Broadband Calibration Source
14 R&S FSP-B16 LAN Interface
15 to 16 reserved
17 R&S FSP-B29 20 Hz Frequency Extension
18 reserved
19 R&S FSP-B21 Ext. Mixer
20 to 22 reserved
23 R&S FSP-B25 Electronic Atte 5 dB Attenuator Steps
24 R&S FS-K74 HSDPA BTS
25 reserved