Rohde & Schwarz R&S FSP Series, Руководство по эксплуатации

Страница: 576 / 796

R&S FSP Remote Control – Description of Commands
SENSe Subsystem
6.182 Operating Manual 1164.4556.12 - 06
[SENSe<1|2>:]MIXer:LOSS[:LOW] <numeric_value>
This command sets the conversion loss of the mixer. If two harmonics are used for the band, it is set
for the lower harmonic.
Example:
"MIX ON"
"MIX:LOSS -12DB"
Characteristics: *RST value: 0 dB
SCPI: conform
Mode: A
This command is only available for model R&S FSP 40 with option R&S FSP-B21 and external mixer
activated.
[SENSe<1|2>:]MIXer:LOSS:TABLe:HIGH <file_name>
This command sets the conversion loss table for higher harmonics in bands with two harmonics.
Parameter: <file_name> := file name
Example:
"MIX ON"
"MIX:LOSS:TABL:HIGH mix_1_6"
Characteristics: *RST value: no table set
SCPI: device-specific
Mode: A
This command is only available for model R&S FSP 40 with option R&S FSP-B21 and external mixer
activated.
[SENSe<1|2>:]MIXer:LOSS:TABLe[:LOW] <file_name>
This command selects a conversion loss table and sets it for the active band. If two harmonics are used
for the band, it is set for the lower harmonic.
Parameter: <file_name> := file name
Example:
"MIX ON"
"MIX:LOSS:table mix_1"
Characteristics: *RST value: no table set
SCPI: device-specific
Mode: A
This command is only available for model R&S FSP 40 with option R&S FSP-B21 and external mixer
activated.
[SENSe<1|2>:]MIXer:PORTs 2 | 3
This command activates the 2- or 3-port mixer. The command refers to the active band selected with
SENSe:MIXer:HARMonic:BAND
.
Example:
"MIX ON"
"MIX:PORT 3"
Characteristics: *RST value: 2
SCPI: device-specific
Mode: A