Rohde & Schwarz R&S FSP Series, Руководство по эксплуатации

Страница: 278 / 796

R&S FSP Instrument Functions
Basic Settings
4.206 Operating Manual 1164.4556.12 - 06
The COLORS softkey gives access to the submenu where the colors for the printout
can be selected. To facilitate color selection, the selected color combination is dis-
played when the menu is entered. The previous colors are restored when the menu
is exited.
For details on selecting and configuring printers, and printing out the measurement
results refer to the Quick Start Guide chapter 1, “Preparing for Use” and chapter
“Printing Out the Measurement Results”.
Remote command:
--
COLOR
(ON OFF)
The ( COLOR ON OFF) softkey switches over from color output to black-and-white
output. All color-highlighted areas are printed in white and all color lines in black.
This improves the contrast on the printout. The default setting is COLOR ON.
Remote command:
HCOP:DEV:COL ON
SCREEN
COLORS
The SCREEN COLORS softkey selects the current screen colors for the printout.
Remote command:
HCOP:CMAP:DEF1
OPTIMIZED
COLOR SET
The OPTIMIZED COLOR SET softkey selects an optimized color setting for the
printout to improve the visibility of the colors on the hardcopy.
Trace 1 is blue, trace 2 black, trace 3 green, and the markers are turquoise.
The other colors correspond to the display colors of the DISP – CONFIG DISPLAY –
DEFAULT COLORS 1 softkey.
Remote command:
HCOP:CMAP:DEF2
USER DEFINED The USER DEFINED softkey opens a submenu for user-defined color selection (see
submenu USER DEFINED COLORS ).
Remote command:
HCOP:CMAP:DEF3
The background is always printed in white and the grid in black.
The background is always printed in white and the grid in black.