Rohde & Schwarz R&S FSP Series, Руководство по эксплуатации

Страница: 575 / 796

Operating Manual 1164.4556.12 - 06 6.181
R&S FSP Remote Control – Description of Commands
SENSe Subsystem
[SENSe<1|2>:]MIXer:HARMonic:BAND A|Q|U|V|E|W|F|D|G|Y|J|USER
This command sets the active band.
Example:
"MIX ON"
"MIX:HARM:BAND E"
Characteristics: *RST value: U
SCPI: device-specific
Mode: A
This command is only available for model R&S FSP 40 with option R&S FSP-B21 and external mixer
activated.
[SENSe<1|2>:]MIXer:HARMonic:TYPE ODD | EVEN | EODD
This command sets the type of harmonic.
Example:
"MIX ON"
"MIX:HARM:TYPE EODD"
Characteristics: *RST value: EVEN
SCPI: device-specific
Mode: A
This command is only available for model R&S FSP 40 with option R&S FSP-B21 and external mixer
activated.
[SENSe<1|2>:]MIXer:LOPower <numeric_value>
This command changes the LO level of the external mixer LO port from 13.0 dBm to 17.0 dBm in 0.1
dB steps. Default value is 15.5 dB.
Example:
"MIX ON"
"MIX ON"
"MIX:LOP 16.0DBM"
Characteristics: *RST value: 15.5 dBm
SCPI: device-specific
Mode: A
This command is only available for model R&S FSP 40 with option R&S FSP-B21 and external mixer
activated.
[SENSe<1|2>:]MIXer:LOSS:HIGH <numeric_value>
This command sets the conversion loss of the mixer for higher harmonics in bands with two harmonics.
Example:
"MIX ON"
"MIX:LOSS:HIGH -14DB"
Characteristics: *RST value: 0 dB
SCPI: device-specific
Mode: A
This command is only available for model R&S FSP 40 with option R&S FSP-B21 and external mixer
activated.