Docomo PRIME series N-01A, Инструкция по эксплуатации

Страница: 587 / 602

38
AT+CLIP=
n
[&F] [&W]
Displays the other party's
Caller ID on a PC when a
64K data communication
call is received.
n
= 0 : Not display the result (initial value)
n
= 1 : Display the result
AT+CLIP?
： Displays the current setting.
+CLIP:
n
,
m
m
= 0 : NW setting not notifying the other
party of the Caller ID in outgoing call.
m
= 1 : NW setting notifying the other party
of the Caller ID in outgoing call.
m
= 2 : Unknown
AT+CLIP=0
OK
AT+CLIP=?
+CLIP:(0,1)
OK
(A call is received when
+CLIP=1 is set)
RING
+CLIP:
"090XXXXXXXX",177,
"123",136
AT+CLIR=
n
Sets whether or not to notify
the other party of the phone
number when originating a
64K data communication
call.
n
= 0 : Complies to the CLIR service contract.
n
= 1 : Not notify the other party of the
caller's phone number.
n
= 2 : Notify the other party of the caller's
phone number (initial value).
AT+CLIR?
： Displays the current setting.
+CLIR:
n
,
m
m
=0 : CLIR is not started (Caller ID is
always sent)
m
= 1 : CLIR is started (Caller ID is always
not sent)
m
= 2 : Unknown
m
= 3 : CLIR temporary mode (default is not
notify)
m
=4 : CLIR temporary mode (default is
notify)
AT+CLIR=0
OK
AT+CLIR?
+CLIR:0,1
OK
AT+CLIR=?
+CLIR:(0-2)
OK
AT+CMEE=
n
[&F] [&W]
Sets whether the error
report of the FOMA terminal
is present.
n
= 0 : Use the ERROR result (initial value).
n
= 1 : +CME ERROR:<err> result code is
used, and a numeral value is used for
<err>.
n
= 2 : +CME ERROR:<err> result code is used,
and characters are used for <err>.
AT+CMEE?
：
Displays the current setting.
The command displayed on the right is the
execution example for cases when there is a
FOMA terminal problem or a connection error.
+CME ERROR result code is as follows.
1
：
no connection to phone
10
：
SIM not inserted
15
：
SIM wrong
16
：
incorrect password
100
：
unknown
AT+CMEE=0
OK
AT+CNUM
ERROR
AT+CMEE=1
OK
AT+CNUM
+CME ERROR:10
AT+CMEE=2
OK
AT+CNUM
+CME ERROR:SIM not
inserted
AT+CNUM Displays the own number of
the FOMA terminal. Result: +CNUM:,<number>,<type>
number: phone number
type
: 129 or 145
129
：
International access code (+) is not
included.
145
：
International access code (+) is
included.
AT+CNUM
+CNUM:,"+8190XXXXX
XXX",145
OK
AT command Outline Parameter/description Command execution example