Docomo PRIME series N-01A, Инструкция по эксплуатации

Страница: 193 / 602

191
Mail
2 “ <No address>”
X
Enter an
address
Select a mail address input
method to enter the
address.
Entering from the
phonebook or received
address list, Entering
directly
→
p.154
■ If the recipient uses an overseas operator
other than DOCOMO
X
Enter + (
0
(1 second or longer)), country
code, and the other party’s mobile phone
number
If the mobile phone number begins with zero (0),
omit the zero.
You can also send SMS by entering “010”,
country code, then the other party’s mobile
phone number. (To reply to SMS received from
overseas, enter “010”.)
3 “ ”
X
Enter the main text
The number and type of characters that can be
entered are based on the “SMS input character”
settings. When set to “Japanese”, you can enter
up to 70 characters regardless of double-byte or
single-byte. When set to “English”, you can enter
up to 160 single-byte alphanumeric characters
and symbols.
Spaces are counted as characters.
4
o
(Send)
An animation is displayed while the SMS is sent.
New SMS screen (p.190)
Send
Preview …… Check the SMS recipient and content before
sending it.
Save
→
p.162
SMS report req.
*
…… Set whether to request an SMS
report when sending SMS.
SMS valid. per.
*
……
Select None/1 day/2 days/3 days as
the storage period of the SMS to store at the SMS center
when the SMS did not reach the recipient due to out of
range, etc. When set to “None”, the SMS is resent and
deleted after a given time.
SMS input char.
*
…… Set the SMS input mode.
Japanese
……
Enter up to 70 characters regardless
of double-byte or single-byte.
English …… Enter up to 160 single-byte
alphanumeric characters.
Erase message
Delete
*: Available only for a single SMS being composed. To
retain the settings for all SMS, configure the settings in
“Mail Setting” (p.180).
● SMS reports
<Disp. SMS report>
SMS reports are mail to report that the other party
has received SMS. You can check SMS reports using
“Disp. SMS report” in the function menu of the Inbox
or sent SMS detail screen. SMS reports are indicated
by “SMS report” in the subject line.
N
z
You cannot send SMS to the entered address
when:
• The address contains characters other than
numbers, “
*
” or “#”
• “+” is entered at other than the beginning of the
address
• The address contains a space
z
Depending on the signal quality, character type or
the other party’s phone, text may not appear
correctly.
z
Even when “Caller ID Notification” is set to “OFF”,
your caller ID appears on the recipient’s display
when SMS is sent.
z
A line feed is counted as 2 characters in Japanese
input mode and as 1 character in English input
mode.
z
You cannot send SMS from the additional number
of multi number. Set the multi number setting to
the basic number.
z
When 2in1 is in B mode, you cannot compose and
send SMS.
z
You cannot send divided (concatenated) SMS.
N