Docomo PRIME series N-01A, Инструкция по эксплуатации

Страница: 57 / 602

55 Continued on next page
Befor
e
Using the Handse
t
5 Set whether to send location
information via the GPS function
→ p.320
If “Permit to send loc.” is set to “ON”, enter your
security code.
6 Set the keypad sound → p.107
7 Set the Neuropointer speed
Configure only the “Simple” setting under
“Neuropointer”.
Neuropointer settings
→ p.125
8
Confirm the setting for Software
Update, then select “OK”
Setting Clock
Set the date and time in “Set main time”. In “Set sub
clock”, set the show/hide setting and display mode of
the sub clock.
z
The FOMA terminal can automatically adjust time
based on the time information (Greenwich Mean
Time, GMT) and the time zone (the local time).
z
The time zone is set as time difference to
Greenwich Mean Time set every hour on the hour.
When another city or area is registered by the
same time difference, “
” appears in the
function display. Press
o
to change the city or
area.
Setting the main time <Set main time>
1
i
X
“Settings/Service”
X
“Clock”
X
“Set main time”
X
“Auto time
adjust”
■
To set the summer time
X
“Summer time”
When set to “ON”, time is displayed with 1 hour
added.
2 Select any item:
Auto …… Automatically adjust the main clock date
and time.
Auto
……
Automatically adjust the date and
time based on the retrieved time information
and time zone information. The local time is
displayed during international roaming.
Manual (Time zone set) …… Select time zone
to display the local time.
Manual (Date time set)
……
Enter date and time in
the main clock manually. Select the time zone, then
enter date and time.
■
To enter date and time
Use
b
to move the highlight, then use dial keys to
enter numbers.
Setting the sub clock <Set sub clock>
1
i
X
“Settings/Service”
X
“Clock”
X
“Set sub clock”
X
“Display
method”
■ To set the summer time
X
“Summer time”
When set to “ON”, time is displayed with 1 hour
added.
■ To display the area name
X
“Area name”
When set to “Display”, the sub clock displays the
area name.
N
z
After you set all functions, the initial setting screen
will no longer appear at power on.
N
z
After you set the date and time, you can use
functions such as “Alarm” and “Schedule” that use
the date and time.
z
The adjustable range of date and time is between
00:00 on January 1, 2004 and 23:59 on
December 31, 2037.
<Auto time adjust>
z
When the power is turned on with a FOMA card
(UIM) inserted, the time is adjusted automatically.
z
If time is not adjusted for long periods after the
power is turned on, reboot the power.
z
A time lag of several seconds may occur. Also,
time may not be adjusted depending on the signal
quality.
z
When you use your FOMA terminal overseas,
time may not be adjusted depending upon
network conditions of roaming operator. In this
case, select the time zone manually.