Docomo PRIME series N-01A, Инструкция по эксплуатации

Страница: 422 / 602

420
Character
Entry
■ To display predicted candidates for the
highlighted reading
Highlight the candidate and press
r
to display
the predicted candidates for the highlighted
candidate reading.
For example, predicted candidates such as “
春
休み
” or “
遥か
” appear for “
春
”.
■ To display conversion candidates for the
highlighted reading
Highlight the candidate and press
u
(CHG) to
display conversion candidates for the highlighted
candidate reading.
For example, predicted candidates such as “
張
る
” or “
貼る
” appear for “
春
”.
4 Select a conversion candidate
The selected word appears
in the character entry area.
●
Editing a reading
<Example: To enter “
らんらんと
”>
1 Enter characters
In this case, the candidates
do not contain “
らんらんと ”.
2
p
(Yomi)
The Yomi edit mode activates, and the cursor
moves to the beginning. The “
ら
column”
characters appear in the operation guidance
area.
3 Press the dial key corresponding
to your preferred character
In this case, press
1
( ら ).
If a character is edited, the
cursor moves to the next
character. Use the same
procedure to edit the
reading.
■ To not edit the reading
X
Use
j
to move the
cursor to the next character
to edit
■ To stop editing in mid-operation
X
p
(Return)
The candidates for the reading at the end
appear.
Setting T9 change mode
Set whether to convert entered text to kanji, katakana
or hiragana when using T9 input.
1
i
X
“Settings/Service”
X
“Other
settings”
X
“Character input set”
X
“T9 change mode”
X
“T9 Kanji
change mode” or “T9 Kana
change mode”
9
( ら column),
0
( わ column),
9
( ら column),
0
( わ column),
4
( た column)