Docomo PRIME series N-01A, Инструкция по эксплуатации

Страница: 264 / 602

262
1S
eg
Recording Scenes while
Watching
<Record 1Seg>
Save current program as a video or picture.
z
Recording may not be performed due to copyright
restrictions, etc.
z
1Seg cannot be recorded during time-shifting
playback.
Recording video
Recorded videos are saved to a microSD card.
z
Video cannot be recorded if signal strength is .
z
To play recorded video → p.341
1 1Seg screen (p.256)
X
@
(1 second
or longer)
Recording starts.
• Channels cannot be changed during
recording.
2
@
(1 second or longer)
Recording ends and video is saved.
• If storage area becomes full, recording
automatically ends and video recorded until
then is saved.
■
Number of storable videos and recording
duration estimates
*1 : Actual storable count may be decreased depending
on the data size.
*2 : Maximum recording time varies depending on the
channel or program.
*3 : Figure estimated with 2GB microSD card.
Saving pictures
Picture is saved to the Image folder in Data Box 1Seg
folder.
z
Picture cannot be saved to a microSD card.
z
Picture cannot be recorded if signal strength is .
z
To play recorded picture → p.330
1
1Seg screen (p.256)
X
@
Picture is saved.
Max. number of
videos
*1
Max. recording
duration (total)
*2
microSD card 99 Approx. 600 min.
*3
N
z
If signal strength becomes , recording
continues but video/audio are not saved.
z
Recording is not interrupted even if screens are
changed by Multitask or a call arrives.
z
During recording, alarm sounds for about 2
seconds, 1 minute before recording scheduled
time. Operation is performed based on “Priority”
set at the time of timer recording registration as
follows:
• “Recording”: Confirmation message appears,
video recording is finished and timer recording
starts.
• “Operation preferred”: Message appears asking
whether to start timer recording. Select “YES” to
end video recording and start timer recording.
Select “NO” to continue video recording.
z
Recording may end before the memory is full.
z
The following shows saved video file name and
title:
File name: PRGXXX (XXX: Number)
Title: YYYYMMDDhhmmXXX
(Y: Year, M: Month, D: Day, h: Hour, m: Minute, X:
Number)
z
Recorded video cannot be set as standby screen,
ring tone, receiving screen, etc.
z
Data broadcast cannot be recorded as video.
z
1Seg contains copy control signals: “Copy Never”,
“Copy Once”, “Copy Free”. Each broadcaster sets
copy control signals.
z
“Copy Never” program cannot be recorded. When
copy control signal changes to “Copy Never”
during recording, recording stops and video
recorded until then will be saved.
N
z
The following shows saved picture file name and
title:
YYYYMMDDhhmmXXX
(Y: Year, M: Month, D: Day, h: Hour, m: Minute, X:
Number)
z
Recorded picture cannot be set as standby
screen, receiving screen, etc.
z
Subtitles or data broadcast cannot be recorded as
picture.
N