Yamaha RCX222 User Manual Download Page 347

Page: 347 / 524

4-248

4-249

Chapter

OPERA

TION

12. "SYSTEM" mode

12.4.4

Clock setting

A clock function is provided in the controller for setting the date and time.

CAUTION

The clock used in the controller might differ from the correct time.
If this happens, set the correct time.

[Procedure]

1) Press

(CLOCK) in "SYSTEM>INIT" mode.

The present date and time are displayed.

■

Initializing the clock

SYSTEM

>INIT>CLOCK

V9.00

DATE,TIME :06/06/01,10:13:35

DATE

TIME

2) Select the item with

(DATE) or

(TIME).

A confirmation message appears on the guideline.

3) Enter the date or time in the specified format and then press

Enter this data using

and

Valid keys

Menu

Function

DATE

Sets the year/month/day.

TIME

Sets the hours/minutes/seconds.

Summary of Contents for RCX222













































































































































































































































































































































































































































































































































Search results

Summary of Contents for RCX222

Reviews:

Related manuals for RCX222

Brands by name

Popular brands

Yamaha RCX222, User Manual

Search results

Summary of Contents for RCX222

Reviews:

Related manuals for RCX222

Brands by name

Popular brands