Yamaha RCX222, User Manual

Page: 308 / 524

4-210
Chapter
4
OPERA
TION
4-211
12. "SYSTEM" mode
■
Network setting (2)
SYSTEM >PARAM>OP.BRD>SELECT V9.00
1.board condition VALID
2.IP address
3.Subnet mask
4.gateway
5.port No 192.168. 0. 2
255.255.255. 0
192.168. 0. 1
23
EDIT JUMP
2) Select the parameter with the cursor (
↑
/
↓
) keys.
c
CAUTION
Changes you made to the IP address, subnet mask and gateway are
enabled after restarting the robot controller. When connecting the robot
controller to an existing network, always consult with the network
administrator for the IP address, subnet mask and gateway settings.
■
Network setting (3)
SYSTEM >PARAM>OP.BRD>SELECT V9.00
1.board condition VALID
2.IP address
3.Subnet mask
4.gateway
5.port No
192.168. 0. 2
255.255.255. 0
192.168. 0. 1
23
EDIT JUMP
3) The currently set parameters are displayed.
When changing the "Board condition" parameter, press (INVALID) to disable
the Ethernet unit or press (VALID) to enable the Ethernet unit.
When changing the communication mode, press (OFFLINE) to set the offline
mode or press (ONLINE) to set the online mode.
When changing other parameters, use to and to make the setting and
press .
4) Press to quit the edit mode.