Thermo Fisher Scientific
Partisol 2000
i
and Partisol 2000
i
-D Instruction Manual
i
About This Manual
This manual provides information about installing, operating, maintaining,
and servicing the Partisol 2000
i
Air Sampler and the Partisol 2000
i
-D
Dichotomous Air Sampler. It also contains important alerts to ensure safe
operation and prevent equipment damage.
The manual is organized into the following chapters and appendices to
provide direct access to specific operation and service information.
●
Chapter 1 “
Introduction
” introduces the user to the advanced features
of the Partisol 2000
i
and Partisol 2000
i
-D and describes the flow and
sampling configurations of the system. It also discusses the flow control
scheme used in the unit.
●
Chapter 2 “
Installation
” describes how to unpack, set up, and start up
the Sampler.
●
Chapter 3 “
Filter Handling and Exchange
” provides procedures for
handling, exchanging and transporting filters.
●
Chapter 4 “
Partisol 2000i Inlet Conversion
” provides procedures for
configuring the Sampler with a variety of inlet systems.
●
Chapter 5 “
Operational Modes
” describes the different operating
modes used on the Sampler.
●
Chapter 6 “
Sampler Settings
” describes the different options available
for programming the Sampler.
●
Chapter 7 “
Sampler Operation
” describes how to verify the Sampler’s
characteristics prior to starting a sampling run, programming a
sampling run, and retrieving data.
●
Chapter 8 “
Calibration
” provides procedures for calibrating the
Sampler and calibration setup.
●
Chapter 9 “
Firmware Screen Descriptions
” describes the front panel
display screens, the front panel pushbuttons, and the menu-driven
firmware.
●
Chapter 10 “
Preventive Maintenance
” provides maintenance
procedures to ensure reliable and consistent instrument operation.
●
Chapter 11 “
Troubleshooting
” presents guidelines for diagnosing
Sampler failures, isolating faults, and includes recommended actions for
restoring proper operation.
