Thermo Scientific Partisol 2000i, Instruction Manual

Page: 128 / 403

Firmware Screen Descriptions
Firmware Overview
9-4 Partisol 2000 i and Partisol 2000 i -D Instruction Manual Thermo Fisher Scientific
ANGE
a bcdefghijklmn BKSP
opqrstuvwxyz PAGE
0123456789 ./- SAVE
CTRST SSET INSTS STAT
EDIT SOFT KEY PROMPT:
CURRENTLY: RANGE
R ANGE
A BCDEFGHIJKLMN BKSP
OPQRSTUVWXYZ PAGE
0123456789 ./- SAVE
CTRST SSET INSTS STAT
The alphanumeric entry screen is used to enter strings consisting of letters,
numbers, and other characters. The cursor may be positioned within the
entry line using the
and keys. If a character is entered over an
existing character, that character will be overwritten. Use the and
keys to switch between the entry line and the keyboard as well as to
move within the keyboard. To select a character to add to the string, use
the cursor keys to position the cursor over the desired character, and then
press the
key to add that character to the entry line.
On the right side of the keyboard are special functions. BKSP is used to
move the cursor in the entry line one place to the left, deleting the
character that was to the left of the cursor and moving any character at or
to the right of the cursor one place to the left. PAGE is used to change the
keyboard character page. For the English language, this switches between
upper and lower-case alphabetic characters. SAVE stores the string from the
entry line into the parameter. Alternately, if the active cursor is moved to
the entry line,
may be pressed to store the string from the entry line
into the parameter.
●
●
●
●
The instrument utilizes the menu-driven firmware as illustrated by the
flowchart in
Figure 9–3 . The Power-Up Screen (page 9-6) is displayed each
time the instrument is turned on. This screen is displayed while the
instrument is warming up and performing self-checks.
After the warm-up period, the Run screen is automatically displayed. The
Run screen is the normal operating screen. This screen provides the current
instrument readings along with some additional information concerning
the instrument status. You can customize the appearance and contents of
the Run screen. See “
Run Screens ” on page 9-71 . From the Run screen, the
Main Menu can be displayed by pressing .
Alphanumeric Entry
Screen
Firmware
Overview
ANGE
A BCDEFGHIJKLMN BKSP
OPQRSTUVWXYZ PAGE
0123456789 ./- SAVE
CTRST SSET INSTS STAT
Entry Line
Keyboard