Firmware Screen Descriptions
Instrument Setup Menu
Thermo Fisher Scientific
Partisol 2000
i
and Partisol 2000
i
-D Instruction Manual
9-45
Table 9–4.
Data in Streaming Records – Non-Measurements
Data
Description
None
Leaves that record field blank.
Filter ID
Filter ID number entered for sample setup
Filter2 ID
Filter ID number entered for sample setup (2000
i
-D
only)
Cass ID
Cassette ID number entered for sample setup
Cass2 ID
Cassette ID number entered for sample setup (2000
i
-
D only)
Start Date
Start date of the current or next filter period
Stop Date
Stop date of the current or next filter period
Elapsed Time
Total sampling time for the current filter
Time
Current instrument time in hours and minutes (hh:mm)
Date
Current year, month and date (yyyy_mon_dd)
Date/Time
Current date and time (yyyy_mon_dd hh:mm)
External Alarms (Flag) 32-bit value shows state of external alarms
Status Codes
Binary representation of the status code shown on
System Status. See “
PRC Values Defined by Codes
”
on page
E-24
for detailed information.
The TCP/IP Settings menu is used for defining parameters that are
required for Ethernet communications.
Note
The instrument power must be cycled after any of these parameters
have been changed for the change to take effect.
▲
In the Main Menu, choose Instrument Setup > Communications >
TCP/IP Settings
.
TCP/IP SETTINGS:
>USE DHCP OFF
IP ADDR 192.168.1.60
NETMASK 255.255.252.0
GATEWAY 192.168.1.1
HOST NAME iseries
CTRST SSET INSTS STAT
NTP SVR 192.168.1.200
TCP/IP Settings
