Partisol 2000i Inlet Conversion
Converting a Partisol 2000i from a PM2.5 Sampler to a PM10 Sampler
4-4
Partisol 2000
i
and Partisol 2000
i
-D Instruction Manual
Thermo Fisher Scientific
Figure 4–6.
Sampler with Straight Tube Installed
Use the following procedure to convert a Partisol 2000
i
configured as a
PM
2.5
Sampler to a PM
10
Sampler.
1.
Open the Partisol 2000
i
enclosure door to access the filter exchange
mechanism.
2.
Pull the filter exchange mechanism toward you to open the filter
exchange mechanism.
3.
Lift the rollers through the slots in the left-hand and right-hand guides
(
Figure 4–7
).
Figure 4–7.
Opening the Filter Exchange Mechanism
Converting a Partisol
2000
i
from a PM
2.5
Sampler to a PM
10
Sampler
