Thermo Fisher Scientific
Partisol 2000
i
and Partisol 2000
i
-D Instruction Manual
2-1
Chapter 2
Installation
Follow the recommendations and procedures in this chapter when
installing the Partisol 2000
i
and 2000
i
-D:
●
“
Lifting
” on page
2-1
●
“
Standard Hardware Configurations
” on page
2-1
●
“
Partisol Stand
” on page
2-7
●
“
Hardware Considerations
” on page
2-10
●
“
Adjusting the Screen Contrast
” on page
2-11
When lifting the instrument, use a procedure appropriate to lifting a heavy
object, such as, bending at the knees while keeping your back straight and
upright. Grasp the instrument at the bottom in the front and at the rear of
the unit. Although one person can lift the unit, it is desirable to have two
persons lifting, one by grasping the bottom in the front and the other by
grasping the bottom in the rear.
Equipment Damage
Do not attempt to lift the instrument by the cover or
other external fittings.
▲
The following is a list of the standard components for the 2000
i
and the
2000
i
-D.
Partisol 2000
i
Sampler with WINS PM
2.5
, VSCC impactor, or pass
through adapter tube:
PM
10
inlet
Filter transport container with 2 cassettes and carriers
3 rainhoods and associated hardware
Sample tube
Partisol stand
Lifting
Standard Hardware
Configurations
Partisol 2000
i
