Filter Handling and Exchange
Filter Exchange
Thermo Fisher Scientific
Partisol 2000
i
and Partisol 2000
i
-D Instruction Manual
3-7
5.
Perform any required maintenance on the system, including servicing
the PM
10
inlet and the VSCC or WINS PM
2.5
Impactor, if necessary
6.
Remove the filter carrier containing the set of filters to be exposed from
its transport container (
Figure 3–3
).
7.
Carefully insert the filter carrier with its installed filter cassettes and
new 47 mm filters into the lower part of filter exchange mechanism
(
Figure 3–7
). The carrier contains a slot in the rear of the carrier that
fits into a pin in the rear of the filter exchange mechanism and a hole in
the front of the carrier that fits into a pin at the front of the lower part
of the filter exchange mechanism.
Figure 3–7.
Inserting/Removing Filter Cassette in Filter Cassette Carrier in the
Partisol 2000
i
