Filter Handling and Exchange
Filter Exchange
3-8
Partisol 2000
i
and Partisol 2000
i
-D Instruction Manual
Thermo Fisher Scientific
Figure 3–8.
Inserting/Removing Filter Cassette in Filter Cassette Carrier in the
Partisol 2000
i
-D
8.
Push the handle of the filter exchange mechanism toward the back of
the instrument to raise the filter platform and enclose the filter cassette
(
Figure 3–5
and
Figure 3–6
).
9.
Press the
button to enter the main menu and then select Sample
Setup. Change the parameters shown in this screen to define the
sampling program of the newly-installed filter. Be sure to save the new
parameters before leaving the Sample Setup screen. Refer to Chapter 7
“
Sampler Operation
” for full details on programming the Sampler to
collect a sample and Chapter 9 “
Firmware Screen Descriptions
”.
10.
Return to the Run Screen by pressing the
button.
11.
Press the
button to leave the Stop Operating Mode and enter
either the Wait or Sampling Operating Mode. The unit will prompt
the operator to verify that this is the correct action. The unit will
automatically execute the sampling program defined in the Filter Setup
Screen of step 9 above.
12.
If an exposed filter was removed from the Sampler in step 4 above,
press
from the run screen to enter the menu and select View
Data records. Move the cursor to the type of data to view, Filter, User,
or Interval, and press
. Scroll through the records on screen to
view the desired data record.
