Firmware Screen Descriptions
View Records Menu
9-12
Partisol 2000
i
and Partisol 2000
i
-D Instruction Manual
Thermo Fisher Scientific
The Filter2 Type screen is used to change the filter type for the 2000
i
-D.
●
In the Main Menu, choose Sample Setup >
Sample
> Filter
Type/Filter2 Type
.
FILTER TYPE:INSERT SAMPLE
CURRENTLY: A
SET TO: A
CHANGE VALUE SAVE
CTRST SSET INSTS STAT
The View Records Menu items are used to view stored records. The
Sampler stores three types of data in its internal data logger: filter data,
interval data, and user data. This information can be viewed on the
Sampler screen and/or downloaded through USB, RS232, or Ethernet. If
the storage capacity for the particular data is reached, the oldest data points
are replaced with the most recent information (“first in, first out”).
Filter Data
- Each record in this data contains information for a different
collection filter exposed to the sample stream. The filter data screens
contain information about the operation and status of the Sampler while
each filter was exposed, calculated averages of filter data recorded by the
Sampler, and a list of the unit’s recorded power failures during sampling.
The Sampler has a capacity of 32 records of filter data.
Interval Data
- The Sampler writes a new record of interval data every 5
minutes. Each record contains the latest 5-minute average of the filter
temperature, ambient temperature, ambient pressure and average flow rate.
The Sampler has a capacity of greater than 86 days of interval data (five
minute logging with six data items).
User Data
- The Sampler stores calculated averages of meteorological data
and other information at the rate specified by the user. The Sampler has a
capacity of greater than 17 days of input data at the default settings (one
minute logging with 18 data items).
●
In the Main Menu, choose
View Records
.
View Records
Menu
