Firmware Screen Descriptions
Service Menu
Thermo Fisher Scientific
Partisol 2000
i
and Partisol 2000
i
-D Instruction Manual
9-75
OTHER MEASUREMENTS 2:
>NONE
AMBIENT TEMP <--
FILTER TEMP
COMPRT TEMP
ELECT TEMP
CTRST SSET INSTS STAT
ELECT TEMP
TEMP DLT
TEMP DLT MAX
RELATIVE HUM
WIND SPEED
WIND DIR
WIND SPD AVG
WIND VEL
WIND VEL AVG
WIND DIR AVG
Table 9–7.
Data in Run Screen – Other Measurements 2
Data
Description
None
Leaves that record field blank
Ambient Temp The ambient temperature in
C
Filter Temp
The temperature at filter 1 in
C
Comprt Temp
The temperature of the filter compartment in
C
Elect Temp
The temperature of the electronics enclosure in
C
Temp Dlt
The temperature of filter 1 minus the ambient
temperature in
C
Temp Dlt Max
The maximum temperature difference of filter 1 over the
sample period in
C
Relative Hum
The relative humidity in percent
Wind Speed
The wind speed in km/hr
Wind Dir
The wind direction in degrees (0-360)
Wind Spd Avg
The wind speed average in km/hr
Wind Vel
The wind velocity in km/hr
Wind Vel Avg
The wind velocity average in km/hr
Wind Dir Avg
The wind direction average in km/hr
The Analog Inputs screen lists analog inputs (
Table 9–8
). It allows the user
to select an analog input signal (none or analog inputs 1-8) that will be
included in the Run screen. If the I/O expansion board is not present,
Analog Inputs
