Firmware Screen Descriptions
Service Menu
9-88
Partisol 2000
i
and Partisol 2000
i
-D Instruction Manual
Thermo Fisher Scientific
TABLE POINT 01 VOLTS:
CURRENTLY: 0.00
SET TO: 00.0
0
MOVE CURSOR
CHANGE VALUE
SAVE
CTRST SSET INSTS STAT
The User Value screen allows the user to set the output value for the
corresponding input voltage for the selected table point in the conversion
table, from -9999999 to 99999999. The default table is a two-point table
with point 1: 0.00 V = 000.0 U and point 2: 10.00 V = 10.0 U, where U is
the previously entered unit of measure.
In the Main Menu, choose Service > External I/O > Analog Input
Configuration >
select channel
>
select point
>
User Value
.
TABLE POINT 01 USER VAL:
CURRENTLY: 0.00
SET TO: 00000.0
0
MOVE CURSOR
CHANGE VALUE
SAVE
CTRST SSET INSTS STAT
The Set Serial Number screen is used to set or reset the serial number.
●
In the Main Menu, choose Service >
Set Serial Number
.
SET SERAIL NUMBER:
CURRENTLY: 00000000
SET TO: 00000.0
0
MOVE CURSOR
CHANGE VALUE
SAVE
CTRST SSET INSTS STAT
The Options screen is used to enable/disable the I/O board presence in the
instrument.
●
In the Main Menu, choose Service >
Options
.
User Value
Set Serial Number
Options Menu
