Firmware Screen Descriptions
Instrument Setup Menu
Thermo Fisher Scientific
Partisol 2000
i
and Partisol 2000
i
-D Instruction Manual
9-41
In the Main Menu, choose Instrument Setup > Communications >
Streaming Data Config >
Add Labels
.
The Prepend Time Stamp screen allows the operator to toggle between Yes
and No. If set to Yes, then each streaming data record will start with a time
and date stamp indicating when that record was generated.
In the Main Menu, choose Service > Communications > Streaming
Data Config >
Prepend Timestamp
.
The Add Flags screen allows the operator to toggle between Yes and No. If
set to Yes, then each streaming data record will include a set of flags that
indicate various diagnostic or alarm conditions.
In the Main Menu, choose Instrument Setup > Communications >
Streaming Data Config >
Add Flags
.
The Item selection screen shows the operator which data fields will be
included in the streaming records and also allow those selections to be
edited. The editing function operates in a manner that is similar to the
Select Content submenu that is used to configure the data logging. When
the item number is selected, the submenu displays a list of data fields that
can be included in the streaming records. The available fields are organized
into the following groups; Other Measurements, Analog Inputs, and Non-
Measurements. If the I/O expansion board is not present, Analog Inputs
will not be available.
In the Main Menu, choose Instrument Setup > Communications >
Streaming Data Config >
Item (1-8)
.
CHOOSE STREAM DATA:
>MEASUREMENTS
OTHER MEASUREMENTS
ANALOG INPUTS
NON-MEASUREMENTS
CTRST SSET INSTS STAT
The Measurements screen lists data fields. It allows the user to select an
item that will be included in the streaming record, such as flow out or
sample time.
●
In the Main Menu, choose Instrument Setup > Communications >
Streaming Data Config > Item # >
Measurements
.
Prepend Timestamp
Add Flags
Item Number
Measurements
