Sampler Operation
Programming a Sample Run
Thermo Fisher Scientific
Partisol 2000
i
and Partisol 2000
i
-D Instruction Manual
7-13
Use the following procedure to set sample parameters manually.
1.
At Sample Setup, scroll to Sample, press
and use the
pushbuttons as indicated on the screen to set the sample start time and
date. Alternately, press
again and use the pushbuttons to select a
field and change the value. Note that holding the pushbutton down
causes the value to increment faster. When the start time setting is
complete, scroll to Save and press
to save the start time and date.
Press
repeatedly to return to the Sample 1 menu.
2.
At the Sample menu, scroll to Stop, press
, and use the
pushbuttons as indicated on the screen to set the sample stop time and
date. When the stop time setting is complete, scroll to Save and press
to save the start time and date. Press
to return to the
Sample menu.
3.
At the Sample menu, scroll to Filter ID, and press
to display the
Filter ID screen. Use the pushbuttons as indicated on the screen to set
the Filter ID number, and press
to save the setting. Press
to return to the Sample menu.
On a 2000
i
-D Sampler, scroll to Filter2 ID, and press
to display
the Filter2 ID screen. Use the pushbuttons as indicated on the screen to
set the Filter2 ID number, and press
to save the setting. Press
to return to the Sample 1 menu.
4.
At the Sample menu, scroll to Cassette ID, and press
to display
the Cassette ID screen. Use the pushbuttons as indicated on the screen
to set the Cassette ID number, and press
to save the setting.
Press
to return to the Sample menu.
On a 2000
i
-D Sampler, scroll to Cassette2 ID, and press
to
display the Cassette2 ID screen. Use the pushbuttons as indicated on
the screen to set the Cassette2 ID number, and press
to save the
setting. Press
to return to the Sample 1 menu.
5.
At the Sample menu, scroll to Filter Type, and press
to display
the Filter Type screen. Use the pushbuttons as indicated on the screen
to change the Filter Type, and press
to save the setting. Press
to return to the Sample menu.
On a 2000
i
-D Sampler, scroll to Filter2 Type, and press
to
display the Filter2 Type screen. Use the pushbuttons as indicated on
the screen to change the Filter2 Type, and press
to save the
setting. Press
to return to the Sample Setup menu.
