Firmware Screen Descriptions
Instrument Setup Menu
9-38
Partisol 2000
i
and Partisol 2000
i
-D Instruction Manual
Thermo Fisher Scientific
PARITY:
CURRENTLY: NONE
SET TO: ODD ?
CHANGE VALUE
SAVE VALUE
CTRST SSET INSTS STAT
The Stop Bits screen is used to select the number of stop bits for the serial
port. Selections of 1 and 2 are available, with 1 being the default value.
In the Main Menu, choose Instrument Setup > Communications >
Serial Settings >
Stop Bits
.
STOP BITS:
CURRENTLY: 1
SET TO: 2 ?
CHANGE VALUE
SAVE VALUE
CTRST SSET INSTS STAT
The RS-232/RS-485 Selection screen allows the user to choose between the
RS-232 or RS-485 specification for serial communication.
Equipment Damage
Disconnect the serial cable before changing the RS-
232 and RS-485 selection to prevent damage to any equipment currently
connected to the instrument.
▲
In the Main Menu, choose Instrument Setup > Communications >
Serial Settings >
RS-232/485 Sel
.
●
●
●
●
●
Stop Bits
RS-232/RS-485 Selection
RS-232/RS-485 SELECT:
XXXXXX
** WARNING **
XXXXXXX
DISCONNECT THE SERIAL
X X
CABLES BEFORE CHANGING
X
THE SELECTION!
XXXXXX
TO CONTINUE
CTRST SSET INSTS STAT
RS-232/RS-485 SELECT:
CURRENTLY: RS-232
SET TO: RS-485 ?
MAKE SURE THAT THE CABLE
XX
IS OFF: PRESS
TO CONFIRM
TOGGLE VALUE
CTRST SSET INSTS STAT
