Firmware Screen Descriptions
Service Menu
9-80
Partisol 2000
i
and Partisol 2000
i
-D Instruction Manual
Thermo Fisher Scientific
DIGITAL INPUT SETTINGS:
>1 NOP STOP
2 NOP START
3 NOP TRIGGER SAMPLE
4 NOP AOUTS TO ZERO
5 NOP AOUTS TO FS
CTRST SSET INSTS STAT
16 NOP EXT ALARM 1
The Logic State screen is used to change the I/O relay to either normally
open or normally closed. The default state is open, which indicates that a
relay connected between the digital input pin and ground is normally open
and closes to trigger the digital input action. If nothing is connected to the
digital input pin, the state should be left at open to prevent the action from
being triggered.
●
In the Main Menu, choose Service > External I/O > Digital Input
Settings >
Select relay (1-16)
>
Press
to toggle and set the logic
state open or closed
.
DIGITAL INPUT SETUP:
>LOGIC STATE OPEN
INSTRUMENT ACTION
CTRST SSET INSTS STAT
The Instrument Action screen allows the user to select the instrument state
that is tied to the selected digital input.
●
In the Main Menu, choose Service > External I/O > Digital Input
Settings >
Select relay (1-16)
>
Instrument Action
.
CHOOSE ACTION:
>NONE <--
STOP
START
TRIGGER SAMPLE
AOUTS TO ZERO
CTRST SSET INSTS STAT
AOUTS TO FS
EXT ALARM 1
EXT ALARM 2
EXT ALARM 3
Logic State
Instrument Action
