Firmware Screen Descriptions
Service Menu
9-78
Partisol 2000
i
and Partisol 2000
i
-D Instruction Manual
Thermo Fisher Scientific
OUTPUT RELAY SETUP:
>LOGIC STATE OPEN
INSTRUMENT STATE
CTRST SSET INSTS STAT
The Logic State screen is used to change the I/O relay to either normally
open or normally closed.
●
In the Main Menu, choose Service > External I/O > Output Relay
Settings > Select relay 1-10 > Logic >
Press
to toggle and set the
logic state open or closed
.
The Instrument State submenu allows the user to select the instrument
state that is assigned to the selected relay output. A submenu lists signal
types of either alarm or non-alarm to choose from.
●
In the Main Menu, choose Service > External I/O > Output Relay
Settings > Select relay 1-10 >
Instrument State
.
CHOOSE SIGNAL TYPE:
>ALARMS
NON-ALARM
CTRST SSET INSTS STAT
The Alarms Status Items screen allows the user to select the alarm status for
the selected relay output. The selected item is shown by “<--” after it.
●
In the Main Menu, choose Service > External I/O > Output Relay
Settings > Select relay 1-10 > Instrument State >
Alarms
.
Note
The I/O BD STATUS alarm is only present if the I/O expansion
board is installed.
▲
Logic State
Instrument State
Alarms