Introduction
Specifications
1-14
Partisol 2000
i
and Partisol 2000
i
-D Instruction Manual
Thermo Fisher Scientific
Table 1–1
lists the Partisol 2000
i
and 2000
i
-D performance specifications.
Table 1–1.
Specifications
Safety/Electrical
Designations
Meets the following safety and electrical designations:
CE: EN550011 Group 1, Class B (Emissions); EN55082-1 (Immunity);
EN611010-1 (Safety)
ETL: UL- and CSA-equivalent approval
IEC 60529 IPX1
Operating
Temperature
-40
°
C to +50
°
C
Flow Rate
5 to 18 volumetric liters per minute (2000
i
only)
Weight 2000
i
- 82 lb (37.2 kg)
2000
i
-D - 85 lb (38.6 kg)
Power Requirements
10 Amp @ 115 VAC, 50/60Hz
5 Amp @ 220-240 VAC, 50/60Hz
Enclosure
14.6 D x 18.5 W x 25.5 H in. (37.1 x 47.0 x 64.8cm), and 30.4 in.
(77.2cm) with the inlet connector
Stand Top Section
14 x 30.8 x 27.1 in. (35.6 x 78.2 x 68.8cm)
Footprint
42.0 x 18.1 in. (107 x 46.0 cm)
Internal Data Storage
Greater than 86 days of interval data (five minute logging with six data
items)
Analog Outputs
6 voltage outputs; 0
–
100 mV, 1, 5, 10 V (user selectable), 5% of full
scale over/under range (user selectable), 12 bit resolution,
measurement output user selectable per channel
Digital Outputs
1 power fail relay Form C, 10 digital relays Form A, user selectable
alarm output, relay logic, 100 mA @ 200 VDC
Digital Inputs
16 digital inputs, user select programmable, TTL level, pulled high
Serial Ports
1 RS-232 with two connectors, baud rate 1200
–
115200, data bits,
parity, and stop bits, protocols: C-Link, MODBUS, and streaming data
(all user selectable)
Ethernet connection
RJ45 connector for 10/100Mbs Ethernet connection, static or dynamic
TCP/IP addressing
USB
USB 2.0, full speed, 12 Mbps; and low speed, 1.5 Mbps
Specifications
