Thermo Fisher Scientific
Partisol 2000
i
and Partisol 2000
i
-D Instruction Manual
E-1
Appendix E
AK Protocol
This appendix provides a description of the AK protocol commands that
can be used to remotely control a Partisol 2000
i
/2000
i
-D using a host
device such as a PC or a datalogger. AK protocol may be used over RS-232,
RS-485, or Ethernet. AK functions can be accessed over Ethernet using
TCP port 9883.
Up to three simultaneous connections per protocol may be made over
Ethernet.
For details of the Partisol 2000
i
/2000
i
-D AK Protocol specification, see the
following topics:
●
“
TCP Communication Parameters
” on page
E-1
●
“
Abbreviations Used
” on page
E-1
●
“
Basic Command Structure
” on page
E-2
●
“
Commands List
” on page
E-3
●
“
Program Register Codes
” on page
E-13
i
Series instruments support the AK protocol over TCP/IP. The register
definition is the same as for the serial interface. Up to three simultaneous
connections are supported over Ethernet.
TCP connection port for AK: 9883
The following is a list of abbreviations used in this document:
<STX> is abbreviation for Start of Text (ASCII code 0x02)
<ETX> is abbreviation for End of Text (ASCII code 0x03)
<SP> is abbreviation for space (ASCII code 0x20)
TCP Communication
Parameters
Abbreviations
Used
