C-Link Protocol Commands
I/O Configuration
B-32
Partisol 2000
i
and Partisol 2000
i
-D Instruction Manual
Thermo Fisher Scientific
dtoa
channel
This command reports the outputs of the 6 or 12 Digital to Analog
converters, according to
Table B–11
. The following example shows that the
D/A #1 is 97.7% full-scale.
Send:
dtoa
1
Receive: dtoa
1
97.7%
Note
If the instrument is in a mode which does not provide a particular
output, and that output is selected, the value will be 0.0.
▲
Note
All channel ranges are user definable. If any customization has been
made to the analog output configuration, the default selections may not
apply.
▲
Table B–11.
Default Output Assignment
D to A
Function
Assignment
1
Voltage Output
Flow Volume
2
Voltage Output
Not Assigned
3
Voltage Output
Not Assigned
4
Voltage Output
Not Assigned
5
Voltage Output
Not Assigned
6
Voltage Output
Not Assigned
7
Current Output
Flow Volume
8
Current Output
Not Assigned
9
Current Output
Not Assigned
10
Current Output
Not Assigned
11
Current Output
Not Assigned
12
Current Output
Not Assigned
list din
list dout
These commands report the current selection for the digital inputs or the
digital outputs in the format. Output no Index number variable name
active state. The active state for digital outputs is open or closed. The active
state for digital inputs is high or low. Channels that have not been assigned
a variable index are not displayed.
Send:
list
dout
Receive: list
dout
