1
4500089
Instruction Sheet
Converting the Surface Scatter
®
7 sc Turbidimeter to SS7 sc-HST
Safety information
Please read this entire document before unpacking, setting up, or operating this equipment.
Pay attention to all danger and caution statements. Failure to do so could result in serious
injury to the operator or damage to the equipment.
To ensure that the protection provided by this equipment is not impaired, do not use or install
this equipment in any manner other than that specified in this document.
Use of hazard information
DANGER
Indicates a potentially or imminently hazardous situation which, if not avoided, could
result in death or serious injury.
CAUTION
Indicates a potentially hazardous situation that may result in minor or moderate injury.
Important Note:
Information that requires special emphasis.
Note:
Information that supplements points in the main text.
Precautionary labels
Read all labels and tags attached to the instrument. Personal injury or damage to the
instrument could occur if not observed. A symbol, if noted on the instrument, will be included
with a danger or caution statement in the manual.
CAUTION
Read and follow these instructions carefully to avoid personal injury and damage to the
instrument. Only personnel qualified to do so should conduct the
installation/maintenance tasks described in this instruction sheet.
ATTENTION
Lire et suivre ces instructions attentivement pour éviter les risques de blessures de
personnes et de détérioration de l’appareil. Les tâches d’installation et d’entretien
décrites dans cette partie de la fuelle d’instructions doivent être seulement effectuées
par le personnel qualifié pour le faire.
ADVERTENCIA
Lea y siga cuidadosamente estas instrucciones a fin de evitar accidentes personales y
daños al instrumento. Las tareas de instalación y mantenimiento descritas en esta hoja
de instrucciones deberán ser efectuadas únicamente por personas debidamente
cualificadas.
Electrical equipment marked with this symbol may not be disposed of in European public disposal systems after 12
August of 2005. In conformity with European local and national regulations (EU Directive 2002/96/EC), European
electrical equipment users must now return old or end-of-life equipment to the Producer for disposal at no charge to
the user.
Note:
For return for recycling, please contact the equipment producer or supplier for instructions on how to return
end-of-life equipment, producer-supplied electrical accessories, and all auxiliary items for proper disposal.
