
11-14
11
File T
ransfer
Sending Data
1
Switch your handset to data transfer mode
2
Follow the instructions on the PC
7
Do not remove the memory card while the transferring data window is
displayed.
Note
Canceling the Data Transfer Mode
1
Use the connected PC’s function to remove an
external device
Setting Display of the Data Transfer Mode Confirmation Window
Set whether to display the confirmation window for switching to data transfer
mode.
Main
menu
E
Settings
E
Connectivity
E
USB
E
Confirmation
1
Select
Display
/
Do not Display
→
@
7
If
Do not Display
is set for the display setting of the confirmation
window for switching to data transfer mode, the window does not
appear even if a USB cable is connected to your handset in Standby. You
can also switch to data transfer mode from the Main menu (page 11-13).
Tip
Connecting to a PC
Using a USB Cable for Dial-up Connections
Use a USB cable to connect your handset to a PC and then access the
Internet, etc. For details on the configuration/operation of the PC modem,
refer to the instruction manual for the PC.
7
The handset sends a message three times in three minutes to the same
device if the receiving device does not respond.
7
In an HSDPA (High Speed Downlink Packet Access) area, you can receive
at a maximum speed of 3.6 Mbps and send at a maximum speed of
384 kbps. Note that sending or receiving very large files can result in
high connection charges.
Note
Using a USB Cable for Charging
While your handset is on, you can charge the battery pack if you connect your
handset and a PC using a USB cable. In order to charge the battery of the
handset from a PC, turn the battery setting
ON
.
Main
menu
E
Settings
E
Connectivity
E
USB
E
Battery
1
Select
ON
/
OFF
→
@
911T̲Web̲070320.indb 11-14
911T̲Web̲070320.indb 11-14
07.4.10 5:04:25 PM
07.4.10 5:04:25 PM