Sharp MX-M266N Operation Manual Download Page 46

Page: 46 / 794

1-5

BEFORE USING THE MACHINE

Contents

AUTOMATIC DOCUMENT FEEDER AND DOCUMENT
GLASS

(1)

Paper feed roller

This roller rotates to automatically feed the original.

(2)

Document feedin

area cover

Open this cover to remove an original misfeed or clean
the paper feed roller.

(3)

Ori

inal

uides

These help ensure that the original is scanned correctly.
Adjust the guides to the width of the original.

PLACING THE ORIGINAL

(page 1-40)

(4)

Document feeder tray

Place originals in this tray. 1-sided originals must be
placed face up.

PLACING THE ORIGINAL

(page 1-40)

(5)

Ori

inal exit tray

Originals are delivered to this tray after scanning.

(6)

Scannin

area

Originals placed in the document feeder tray are scanned
here.

REGULAR MAINTENANCE

(page 1-52)

(7)

Document

lass

Use this to scan a book or other thick original that cannot
be fed through the automatic document feeder.

PLACING THE ORIGINAL ON THE DOCUMENT
GLASS

(page 1-42)

(2)

(7)

(3)

(4)

(5)

(6)

(1)

Summary of Contents for MX-M266N



























































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MX-M266N

Reviews:

Related manuals for MX-M266N

Brands by name

Popular brands

Sharp MX-M266N, Operation Manual

Search results

Summary of Contents for MX-M266N

Reviews:

Related manuals for MX-M266N

Brands by name

Popular brands