Sharp MX-M266N, Operation Manual

Page: 391 / 794

4-82
FACSIMILE
Contents
3
Select 2in1.
(1) Touch the [Special Modes] key.
+
SPECIAL MODES (page 4-71)
(2) Touch the [2in1] key so that it is
hi g hli g hted.
(3) Touch the [OK] key.
4
Touch the [Ori g inal] key.
5
Specify the orientation in which the
ori
g inal is placed.
(1) Touch the appropriate [Ima g e Orientation]
key.
If this setting is not correct, a suitable image may not be
transmitted.
(2) Touch the [OK] key.
6
Press the [START] key.
Scanning begins.
• If you inserted the original pages in the document feeder tray, all pages are scanned.
A beep will sound to indicate that scanning is finished.
• If you are scanning the original on the document glass, scan each page one page at a time.
When scanning finishes, place the next original and press the [START] key. Repeat until all pages have been scanned and
then touch the [Read-End] key.
A beep will sound to indicate that scanning is finished.
The [Configure] key can be touched in the scan-end confirmation screen to change the exposure, resolution, scan
size, and send size. (However, when scanning each even-numbered page of the original, only the exposure can be
changed.)
To cancel scannin g ...
Press the [STOP] key ( ).
1
2 2in1
Fax/Special Modes
Card Shot
OK
Dual Page
Scan
Slow Scan
Mode
Quick File
Mixed Size
Original
Erase
Job
Build
File
Program
Timer
Original
Count
(3) (2)
Auto
Auto
Auto
USB Mem. Scan Fax Scan
Standard
Auto Reception
Fax Memory : 100 %
Internet Fax PC Scan
Scan : Send : 8 ½ x11
File
Quick File
Address Review
Direct TX
Sub Address
Address Book
Special Modes
Resolution
Exposure
Original
Preview
Auto Auto 8½x11
Scan Size Send Size 100%
Fax/Original
OK
2-Sided
Booklet 2-Sided
Tablet
Image Orientation
(1) (2)