Polycom RealPresence 2000 Administrator'S Manual Download Page 177

Page: 177 / 1130

Chapter 4-Additional Conferencing Information

Polycom, Inc.

4-31

•

Video Preview of the video sent from the conference to the participant is shown

according to the line rate and video parameters of the level threshold to which the

participant is connected.

•

In versions up to and including Version 7.2.2, only users with Administrator

authorization could request to view a video preview. In later versions, all users can

view a video preview.

•

Video preview is supported with MPM+ and MPMx cards.

•

Only one preview window can be displayed for each

RMX Web Client

connection

(workstation).

•

Only one preview window can be displayed for a single conference and up to four

preview windows can be displayed for each media card on different workstations (one

per workstation and one per conference). For example, if the RMX contains two media

cards, and there are 5 conferences running on the RMX, if five conferences are running

on the same media card, only four conferences can be previewed from four different

workstations. If four or less conferences are running on one media card and the

remaining conferences are running on the other media card, all five conferences can be

previewed.

•

Live video that is shown in the preview window does not include the Content when it

is sent by the participant.

•

Video Preview is supported in cascaded conferences.

•

If the video preview window is opened when the IVR slide is displayed to the

participant, it will also be displayed in the video preview window.

•

Video Preview is supported with

H.264 High Profile.

•

Video Preview is not supported for endpoints using the

RTV

protocol.

•

Video Preview is disabled in encrypted conferences.

•

Video preview cannot be displayed when the participant’s video is suspended.

•

Participant’s video preview and the CMAD window cannot be open and running

simultaneously on the same PC as both require the same DirectDraw resource.

Workstation Requirements

To be able to display the video preview window, the following minimum requirements
must be met:
•

Windows XP, Windows Vista and Windows 7

•

Internet Explorer 7 and later

•

DirectX is installed

•

DirectDraw Acceleration must be enabled and no other application is using the video

resource

•

Hardware acceleration must be enabled

Testing your Workstation

To ensure that your workstation can display the video preview window:

In Windows, click

Start > Run

The

Run

dialog box opens.

Summary of Contents for RealPresence 2000











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for RealPresence 2000

Reviews:

Related manuals for RealPresence 2000

Brands by name

Popular brands

Polycom RealPresence 2000, Administrator'S Manual

Search results

Summary of Contents for RealPresence 2000

Reviews:

Related manuals for RealPresence 2000

Brands by name

Popular brands