Polycom RealPresence 2000, Administrator'S Manual

Page: 973 / 1130

Appendix G-Configuring Direct Connections to the Collaboration Server
Polycom, Inc.
G-5
The Fast Configuration Wizard starts.
If no USB memory stick is detected and either : this is the First Time Power-up or the
Default IP Service has been deleted and the RMX has been reset, the following dialog box
is displayed:
For more information about First-time Power-up and the
Fast Configuration Wizard see
the Polycom® RealPresence Collaboration Server (RMX) 1500/2000/4000 Getting Started
Guide , " Procedure 1: First-time Power-up” on page 2-8 .
4
Enter the following parameters using the information supplied by your network
administrator:
— Control Unit IP Address
— Shelf Management IP Address
— Control Unit Subnet Mask
— Default Router IP Address
5
Click the Save & Close button.
The system prompts you to sign in with the new Control Unit IP Address.
6
Disconnect the LAN cable between the workstation and the LAN 2Port on the RMX’s
back panel.
7
Connect LAN 2Port on the RMX’s back panel to the local network using a LAN cable.
8
Enter the new Control Unit IP Address in the browser’s address line, using a workstation
on the local network, and press Enter to start the RMX Web Client application.
9
In the RMX Web Client Login screen, enter the default Username (
POLYCOM
) and
Password (
POLYCOM
) and click the Login button.