Chapter 5-Cascading Conferences
Polycom, Inc.
5-35
Method II
Depending on the dialing direction, the following procedures must be performed:
Setting Flags on the RMX
When running conferences in mixed environment (RMX and MGC) there may be small
differences between the line rates each MCU is sending. In the RMX, several flags must be
set to ensure that these differences will not cause the cascaded link to connect as Secondary
and that Content flows correctly between the cascaded conferences. This procedure is
performed once per RMX.
To modify the flags:
1
In the RMX Web Client menu, click
Setup>System Configuration
.
2
In the
System Flags
dialog box, add the following new flags and values:
—
MIX_LINK_ENVIRONMENT=YES
Setting this flag to YES will adjust the line rate of HD Video Switching conferences
run on the
RealPresence Collaboration Server (RMX) 1500/2000/4000
from 1920Kbps
to 17897Kbps to match the actual rate of the HD Video Switching conference
running on the MGC. In such case, the conference can include IP and ISDN
participants.
—
IP_ ENVIRONMENT_LINK=NO
Setting this flag to YES will adjust the line rate of HD Video Switching conferences
Table 5-4
Set up Procedures according to the Dialing Direction
Dialing
Direction
MGC Level 1
RealPresence Collaboration Server
(RMX) 1500/2000/4000
Level 2
MGC to RMX
Set the appropriate flags (done once
only).
Set the appropriate flags (done once
only).
Define the cascade-enabled Entry
Queue, setting it as
Slave
.
Define the conference setting and
its line rate to be the same as the
one set on the RMX.
Define the conference setting and its line
rate to be the same as the one set on the
MGC.
Define the dial-out participant
(Cascaded Link) to the conference
running on the RMX.
RMX to MGC
Set the appropriate flags (done once
only)
Set the appropriate flags (done once
only)
Define the cascade-enabled Entry
Queue.
Define the conference setting and
its line rate to be the same as the
one set on the RMX.
Define the conference setting and its line
rate to be the same as the one set on the
MGC.
Define the dial-out participant (Cascaded
Link) to the conference running on the
MGC, setting the participant Cascade
parameter to
Slave
.
Summary of Contents for RealPresence 2000
