Polycom RealPresence 2000, Administrator'S Manual

Page: 828 / 1130

RealPresence Collaboration Server (RMX) 1500/2000/4000 Administrator’s Guide
23-46
Polycom, Inc.
Enabling 802.1X Authentication can result in the RMX being disconnected from the network
and a warning message is displayed:
System Flags
The following system flags are used to manage the 802.1X Authentication process. They must
be manually added to system.cfg if their default values need to be modified.
Disabling 802.1X Authentication
Switching to http mode from https mode by inserting a USB key containing a file named
RestoreFactorySecurityDefaults.txt into the RTM-IP USB port disables 802.1X functionality
Table 23-13 New Flags
Flag name Description
802_1X_CERTIFICATE_MODE Determines whether one TLS certificate is retrieved from the
Certificate Repository for all IP services or if multiple
certificates will be retrieved, one for each IP service.
Range: ONE_CERTIFICATE, MULTIPLE_CERTIFICATE
Default: ONE_CERTIFICATE.
802_1X_SKIP_CERTIFICATE_VAL
IDATION If the flag value is:
•
YES - The retrieved certificate is not validated against the
CA certificate.
•
NO - The retrieved certificate is validated against the CA
certificate. Validation failure raises an Active Alarm and is
reported in the Ethernet Monitoring dialog box.
Range: YES, NO.
Default: YES.
802_FIPS_MODE If the flag value is YES, the availability of the MD5
Authentication Protocol will neither be displayed as
selectable option nor supported.
Range: YES/NO.
Default: NO