Polycom RealPresence 2000, Administrator'S Manual

Page: 1017 / 1130

Appendix H-Setting the RMX for Integration Into Microsoft Environment
Polycom, Inc.
H-37
4 Click the DNS tab.
5
In the DNS field, select Specify to define the DNS parameters.
6
View or modify the following fields:
7 Click OK .
Table 9 Management Network Properties – DNS Parameters
Field Description
MCU Host Name Enter the name of the MCU on the network. This name must be
identical to the FQDN name defined for the RMX in the OCS and
DNS.
Default name is RMX.
Shelf Management
Host Name Displays the name of the entity that manages the RMX hardware.
The name is derived from the MCU host name. Default is RMX_SHM.
DNS Select:
•
Off – if DNS servers are not used in the network.
•
Specify – to enter the IP addresses of the DNS servers.
Note: The IP address fields are enabled only if Specify is selected.
Register Host Names
Automatically to DNS
Servers Select this option to automatically register the MCU Signaling Host
and Shelf Management with the DNS server.
Local Domain Name Enter the name of the domain where the MCU is installed as defined
in the Office Communications Server/Lync Server.
DNS Servers Addresses:
Primary Server
The static IP addresses of the DNS servers (the same servers
defined in the Office Communications Server/Lync Server).
A maximum of three servers can be defined.
Secondary Server
Tertiary Server