Polycom RealPresence 2000, Administrator'S Manual

Page: 1075 / 1130

Appendix I-Polycom Open Collaboration Network (POCN)
Polycom, Inc.
I-15
Content
Polycom and Cisco endpoints can share Content within a Cisco TelePresence environment. The
content sharing experience depends on whether the endpoints are registered with the DMA
or CUCM .
• H.239
— A variety of resolutions and frame rates are supported.
For more information see " H.239 / Content” on page 4-1 .
— Can be used with SIP and H.323 endpoints, desktop ( CMAD ), room systems ( HDX )
and ITP ( OTX , RPX ).
— Not supported by Lync clients, IBM clients and Cisco CTS endpoints.
— Cannot be used when HDX endpoints are registered to CUCM.
• TIP
—
The resolution is fixed at XGA at 5fps.
—
Supported on HDX, Polycom ITP and Cisco CTS systems.
• The following content compatibility options are available:
— Tip not enabled – CTS cannot join the conference, all other endpoints can share
H.239 content.
— TIP video compatibility – CTS receives people video, all other endpoints can share
H.239 content.
— TIP video and content compatibility – CTS and HDX can share TIP content, all
other endpoints receive only the people video.
For more information see "
Procedure 4: Configuring a TIP Enabled Profile on the RMX”
on page I-21 .
Cisco Equipment
To configure the various Cisco entities the following procedures are required.
CUCM
1
Configure the CUCM to send and receive calls from the H .323 network.
Table I-4 Endpoint Registration Options - Content Sharing Experience
Multipoint Calls on RMX
Content
Sharing
Content
Endpoints Registered to DMA
HDX/ITP to HDX/ITP Yes Yes
HDX/ITP to Cisco CTS Yes Yes
Cisco CTS to HDX/ITP Yes No
Endpoints Registered to CUCM
HDX/ITP to HDX/ITP Yes No
HDX/ITP to Cisco CTS Yes No
Cisco CTS to HDX/ITP No No