RealPresence Collaboration Server (RMX) 1500/2000/4000 Administrator’s Guide
J-4
Polycom, Inc.
USB Restore
Restoring the RMX Using the USB Port
can be used to set the
RMX
back to its factory default
settings, if for any combination of factors the system becomes unstable or unmanageable.
There are also administrative operations that cannot be performed on a
secured
or
ultra
secured
system that require the
RMX
to be set back to its default (normal) security mode.
When performing
operations using a USB device, the following
USB
ports are used:
•
RMX 1500
- left most
USB
port on the
front panel
.
•
RMX 2000
- at the bottom right corner of the
RTM IP
card on the
back panel
.
Do
not
insert a
USB
device into the
RMX’s USB
port unless it is your intention to disable
Secured
Mode
or perform a
Comprehensive Restore to Factory Defaults
.
Do
not
use any
USB
ports other than the ones indicated in the following diagrams.
Summary of Contents for RealPresence 2000
