Panasonic AFP7MC16EC, User Manual

Page: 265 / 504

11.1 Types of Home Return
11-3

DOG method 1 (Based on front end + Z phase)
•
The leading edge of the first home position (Z phase) is set as a home position after the
detection of the leading edge of a near home input (HOME).
•
In the case of the DOG method 1, the operation stops once after the detection of the leading
edge of a near home input (HOME) as the home return positioning control mode
(Method33/34) of Servo Amplifier A6B/A5B is used. The home position is searched at a
home return creep speed again, and the operation stops when the leading edge of the first
home position (Z phase) is detected.
(Note): The home return positioning control mode (Method33/34) of Servo Amplifier A6B/A5B is a mode to detect an
index pulse as a home position. The home return direction of Method33 is the - direction, and that of Method 34
is the + direction.
①
The starting point is
between the near home
input and limit (-) input.
③
The starting point is on the
near home input.
Limit (-) input
Z phase
Target speed
Home return creep speed
Home return creep speed
Home return creep speed
Target speed
Target speed
Target speed
Target speed
Home return
deceleration time
Home return
deceleration time
Home return
deceleration time
Home return
deceleration time
Limit stop
deceleration time
Limit (+) input Near home input
Home return direction
②
The starting point is on the
limit (-) input.
④
Temporary stop
The starting point is
between the near home
input and limit (+) input.
(including the starting point
on the limit (+) input)