LSIS 6731001500, User Manual

Page: 331 / 659

318
Learning Advanced Features
Code Description
Monitor[mA]
16 I2 Monitor[%] Displays input current terminal I2 value as a percentage.
17 PID Output Displays the PID controller output.
18 PID Ref Value Displays the scale of the reference value and sets the
value of PID reference.
19 PID Fdb Value Displays the PID controller feedback volume.
20 EPID1 Mode Displays the External PID1 mode.
21 EPID1 Output Displays the External PID1output value.
23 EPID1 Ref Val Displays the External PID1 reference value.
CNF-21–23
Monitor Line-x
Select the items to be displayed in monitor mode. Monitor mode is the first mode
displayed when the inverter is powered on. A total of three items, from monitor
line-1 to monitor line- 3, can be displayed simultaneously.
CNF-24 Mon
Mode Init
Selecting ‘1 (Yes)’ initializes CNF-20–23.
5.50 Operation Time Monitor
Note
Inverter power consumption
Values are calculated using voltage and current. Electric power is calculated every second and the results
are accumulated. Setting CNF-62 (WH Count Reset) value to ‘1 (Yes)’ will reset cumulated electric energy
consumption. Power consumption is displayed as shown below:
•
Less than 1,000 kW: Units are in kW, displayed in 999.9 kW format.
•
1–99 MW: Units are in MW, displayed in 99.99 MWh format.
•
100–999 MW: Units are in MW, displayed in 999.9 MWh format.
•
More than 1,000 MW: Units are in MW, displayed in 9,999 MWh format and can be displayed up to
65,535 MW. (Values exceeding 65,535 MW will reset the value to 0, and units will return to kW. It will
be displayed in 999.9 kW format).