LSIS 6731001500, User Manual

Page: 299 / 659

286
Learning Advanced Features
AP1-61
AP1-62
AP1-63
AP1-64
AP1-65
Max Freq
Frequency
AP1-71
AP1-72
Aux Motor 1
Aux Motor 2
Aux Motor 3
Aux Motor 4
Aux Motor 5
Feedback
AP1-71
AP1-72
Perform Main_Exch
Reset the [Auto Op Time]
AP1-62
AP1-63
0%
100%
Fx
Off
On
Stop
Run
Inv State
Main Motor
Main Motor
5min
10min
30min
Operation time
M1(30min) / M2(25min) /
M3(20min)
Pr iori ty at the moment
M1  M2  M3 /
M4  M5
Priori ty at the moment
M1  M3  M2 /
M4  M5
Pr iority at the moment
M4  M5  M3 /
M2  M1
Supposing its operation in
less than 1minute
AP1-65
AP1-
74
Motor to operate MMC : M1 , M2, M3
Standby motor : M4, M5
Motor to operate MMC : M3, M4 , M5
Standby motor : M1, M2
AP1-72
Main Auto Change operation (Op Time Order) when Operable Motor and Standby Motor are set to 3 and 2 each
Option 3: AP1-91: [Interlock DT]
5.44.4 Interlock
When there is motor trouble, the interlock feature is used to stop the affected motor and replace it
with another that is not currently operating (off state). To activate the interlock feature, connect
the cables for abnormal motor signal to the inverter input terminal and configure the terminals as
interlock 1–5 inputs. Then, the inverter decides the motor’s availability based on the signal inputs.
The order in which the alternative motor is selected is decided based on the auto change mode
selection options set at AP1-55.
Group Code Name LCD Display Parameter Setting Setting Range Unit
AP1 90 Interlock selection Interlock 1
0 NO
-
1 YES
After configuring the IN-65–71 multi-purpose input terminals as Interlock input 1–5, if an interlock
signal is received from an auxiliary motor, the output contacts are turned off for the motor and the